Construction Chemical & Water Proofing Products

Service Details:

SPLASH is a clear single component, water based free flowing liquid developed specially for waterproofing of very difficult areas, wherein other waterproofing systems cannot be implemented. SPLASH is a ready to use material available in white turbid color, which penetrates in to the pores. It dries to a clear and tough film which gives high quality waterproofing.

Additional Information:

• Production Capacity: Unlimited
• Delivery Time: 2 days

Service Details:

Sarnafil® G 410-15L FELT 200 is a multi-layer, synthetic roof waterproofing sheet based on premium-quality polyvinyl chloride (PVC) with inlay of glass non-woven and polyester fleece backing.

Usage:

• Waterproofing membrane used for fully adhered roofs.

Product Data:

Service Details:

Sarnafil® G 476 is a multi-layer, synthetic roof waterproofing membrane based on premium-quality polyvinyl chloride (PVC) with an inlay of glass non-woven.

Usage:

• Concealed flat roofs (green roofs, utility decks, ballasted roofs)

Characteristics:

• Outstanding root resistance
• Excellent weld ability
• Good flexibility in cold temperatures
• Excellent dimensional stability
• High resistance to mechanical impact
• High water vapour permeability
• Recyclable

System Structure:A wide range of tested and approved Sika accessories for the single-ply roofing system is available: vapour retarder, thermal insulation, separation layer, fasteners, detailing membrane, contact adhesive, perimeter bars, welding cords, termination bars, sealants, prefabricated parts (corners, roof drains, scuppers, walkway pads, lightning conductor clips etc.) etc.


Substrate Quality:The substrate surface must be uniform, smooth and free of any sharp protrusions or burrs. The supporting layer must be compatible to the membrane, clean, dry and free of grease and dust.





Specifications:

Service Details:

Sikaflex is a premium-grade, high-performance, moisture-cured, 1-component, polyurethane-based, non-sag elastomeric sealant.

Use:

• Designed for all types of joints where maximum depth of sealant will not exceed 1/2 in.n
• Excellent for small joints and fillets, windows, door frames, reglets, flashing, common roofing detail applications, and many construction adhesive applications.
• Suitable for vertical and horizontal joints; readily placeable at 40°F.
• Has many applications as an elastic adhesive between materials with dissimilar coefficients of expansion.
• Submerged conditions, such as canal and reservoir joints.

Advantages:

• Eliminates time, effort, and equipment for mixing, filling cartridges, pre-heating or thawing, and cleaning of equipment.
• Fast tack-free and final cure times.
• High elasticity - cures to a tough, durable, flexible consistency with exceptional cut and tear-resistance.
• Stress relaxation.
• Excellent adhesion - bonds to most construction materials without a primer.
• Excellent resistance to aging, weathering.
• Proven in tough climates around the world.
• Odorless, non-staining.
• Jet fuel resistant.
• Certified to the NSF/ANSI Standard 61 for potable water.
• Urethane-based; suggested by EPA for radon reduction.
• Paintable with water-, oil- and rubber-based paints.
• Capable of ±35% joint movement

Surface Preparation
Clean all surfaces. Joint walls must be sound, clean, dry, frost-free, and free of oil and grease. Curing compound residues and any other foreign matter must be thoroughly removed. A roughened surface will also enhance bond. Install bond breaker tape or backer rod to prevent bond at base of joint.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: Unlimited
• Delivery Time: 2 Days
• Packaging Details: Bucket

Service Details:

Sika® Raintite I is a multifunctional polymer emulsion for enhancing the properties of mortar/ concrete/ grout/ cement slurry providing good adhesion, water resistance and improvement of several other properties.

Usage:

• Waterproofing of roof slabs, sunken slabs, basements, water tanks, sunshades, etc.
• As a bonding agent for uses in repair and plastering
• For making polymer mortar for repairs mortars, etc.
• Treatment for leaching and salt petre action
• Multipurpose mortar admixture for injection grouts
• Additive to cement based paints for waterproofing

Characteristics:

• Improved impermeability against water ingress
• Extremely good bonding to moist substrates, extremely improved mechanical, flexural strength and abrasion resistance properties
• UV resistant & suitable for external coating
• When used as an additive to cement based paint improves impermeability, water repellency and anti fungal property of the painted surface (site trials are always advised before application for shade variations, if any)
• Sika® Raintite I can be diluted with water (1 : 0 to 1 : 4) depending on the type of application
• Screed required with Sikacim®/ Sika® Plastocrete Super to protect waterproofing layer

Consumption:

Additional Information:

• Delivery Time: 2 Days

Service Details:

Sika Cracksil Arylic Paste is a single pack, acrylic based, ready to use putty for filling the cracks on internal and external plastered surfaces

Uses:
Ready to use crack filling paste for internal & external surface cracks

Characteristics /Advantages:

• Paste form, easy to apply
• Non-shrink
• For both internal and external surfaces
• Hairline cracks should be opened to at least 1mm for ease of application
• Can be applied on damp surfaces but not on cracks with running water
• Non-staining
• UV resistant
• For non-moving cracks upto 5-6 mm wide in plasters and walls
• Self-curing and excellent adhesion with substrates both for vertical and horizontal application

Not suitable for typical stress cracks at junctions of wall and columns, lintel beam®and masonry etc. where Sikaflex Construction(J) should be used

Application Method:

• Fine hair line cracks must be widened with ‘V” groove up to 1 mm minimum and then filled
• For filling Sika Cracksil Acrylic Paste on the internal surface, existing POP or®Sika Wall Décor (wall putty) must be removed till plaster surface is exposed.
• For porous surfaces, apply primer coat prepared with Sika Cracksil Acrylic Paste and water in 1:1 proportion over the crack.
• Fill Sika Cracksil Acrylic Paste when the surface is tacky and not dried completely.
• Press Sika Cracksil Paste firmly into the crack with a spatula or putty knifes and level with the surface
• Care must be taken to avoid formation of cavities or bubbles during application.
• Allow it set for 24 hours and then apply another coat of Sika Cracksil Acrylic Paste in case of sag or depression
• Further POP or Sika Wall Décor (wall putty) application can be taken up once it is fully dry
• For best results allow Sika Cracksil Acrylic Paste to cure for 7 days

Cleaning of Tools
Clean all tools and application equipment with water immediately after use.Hardened / cured material can be removed mechanically.

Notes on Application /Limitations

• Pre-test for over paintability and paint compatibility are recommended.
• Colour deviations may occur due to chemicals, high temperature, UV-radiation. A change in colour does not influence the technical and protective performance of the product.
• Do not use Sika Cracksil Acrylic Paste as glass sealer, in floor joints, in sanitary joints, on marble, natural stone, in joints with permanent water immersion, in cracksmore than 5mm wide and cracks in POP/Painters’ putty.
• Sika Cracksil Acrylic Paste is not recommended for cracks in structural load bearing members, filling expansion joints or on cracks appearing at the junctions of masonry and concrete in civil engineering structures (e.g.-column and wall junction, lintel and overlying masonry junction, etc).For this purpose use only Sikaflex -Construction (J) which is a polyurethane based sealant and overcoat itwith Sikaflex -11FC white adhesive before painting.
• Close the container tightly after application and prevent contact of material with air while not in use to prevent curing and hardening of material.

Application Details

• Consumption: 1kg covers 40-50 rm (for a length of 1m, and joint size 6 mm x 6 mm average)
• Joint Configuration: Minimum joint width=1mm, Maximum joint width=5- 6 mm
• Width: depth ratio for joints upto 10 mm wide=1:1
• Substrate Quality Clean, sound and dry, homogeneous, free from grease, dust and loose particles.
• Substrate Preparation /Priming: Paint, laitance and other poorly adhering particles must be removed. Standard\construction rules must be observed.

 

Service Details:

SikaLatex ® is a high quality emulsion that substantially improves the qualities of cement mortars in applications such as: Thin layer patching mortars Renders Floor screeds Concrete repair mortars Abrasion resistant linings Tile fixing mortars Masonry mortars

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: Unlimited
• Delivery Time: 2 - 3 Days

Service Details:

All types of sika construction chemicals we supply. Sika AG acquires Cappar Ltd. based in Ontario, Canada. With the acquisition Sika expands its presence in the polymer flooring, specialty lining and coatings mar-ket in Canada. In addition, Cappar will strengthen Sika’s technology offering in 
specialty epoxy resin applications such as structural crack repairs, waterproofing and polymer concrete compositions. Cappar will be integrated into Sika Canada’s Business Unit structure.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: Unlimited
• Delivery Time: Depends on location

Service Details:

A backer rod is a cylindrical type of foam used to fill cracks and gaps between building materials. It is used in a wide range of applications including tiling, flooring, window paneling and stoneware.
FOB:2.00MOQ:100-Running Mtr

Additional Information:

• Item Code: 000
• Production Capacity: Unlimited
• Delivery Time: 7 days
• Packaging Details: Roll

Service Details:

Sika® WP Shield Primer IN is a single component, quick drying, water based modified bituminous primer which penetrates and activates the substrates. It improvesadhesion between the substrate and preformed bituminous sheet membranes in SikaShield® range.

Service Details:

This type of membrane is manufactured by modifying premium grade asphalts with atactic poly propylene and specially reinforced with non-woven polyester. This type of membrane show excellent strength, elasticity and durability.

Usage:

• It is used as waterproofing/dam proofing membrane for protection of various substrates in wide range of applications
• Medium to large roof slabs (domestic, commercial and industrial)
• Basements and raft slabs
• Underground car parks, etc.
• Bridges & Underpass

Storage Conditions / Shelf-Life:

• Rolls must be stored in their original package, in vertical position and under cool and dry conditions.
• They must be protected from direct sunlight, rain, snow and ice, etc.
• The shelf life is 12 months if stored as per recommendations

 

Value Base:

• All technical data stated in this Product Data Sheet are based on laboratory tests.
• Actual measured data may vary due to circumstances beyond our control.

 

Health and Safety Information:

• For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent Material Safety Data Sheet containing physical, ecological, toxicological and other safety-related data.

Service Details:

We offer Sound Proofing Membranes Tecsound.

Features:

• In combination with sound-absorbent materials, it results in products with high acoustic performance characteristics.
• Damping of impact noise produced by atmospheric agents in metals roofs.
• Reduction of impact noise level in all types offrameworks, in formation of floating floors
• Airborne noise insulation in ceilings and roofs.

Material used :- Tecsound 35