New Items

Service Details:

Davco K11 CWA (Crystalline Waterproofing Admixture) is a special cementitious mix of active chemicals that readily reacts with moisture in the concrete to form crystalline structures within the pores and capillary tracts of the concrete. Davco K11 CWA effectively waterproofs the concrete against ground water penetration from any direction, protecting against waterborne salts and eliminating concrete decay. Davco K11 CWA, an integral waterproofing system that gives a strong and lasting protection from harsh environmental conditions, is ideal for interior and exterior below grade concrete structures. As conditions on projects site and temperature varies, please contact technical professionals for advice on the use of Davco K11 CWA for your specific project.

• Long lasting integral waterproofing system
• Self healing, crack sealing characteristics
• Resists extreme hydrostatic pressure

Additional Information:

• Delivery Time: 5
• Packaging Details: 20kg Bucket

Service Details:

• Sikament-4101 NS a plasticizer for free flowing concretein floor, slabs, foundations, slender componentswith dense reinforcement, walls, columns, pavementsand other structural and non structural elements.
• Specially recommended for the following types of concrete: Ready mix concrete Pre cast concrete Site batched concrete. 
• These types of admixtures are especially important in applications where maintaining the integrity of the concrete is critical.

Advantages:

• Improved water reduction
• Improved strength and density
• Improved consistence retention
• Improved durability
• Improved water tightness/ water proofed concrete

Additional Information:

• Delivery Time: 2-3 Days

Service Details:

Asianpaints SmartCare Ready Mix Plaster is a specially designed ready to use cement based plaster with high quality polymer additives and well graded sand and fillers which can be used for plastering over bricks, block, stone walls as well as concrete surfaces.
Features: 
• Negligible Silt Content, thereby improving thestrength parameters• Compact Plaster, and reduce void gaps• Excellent Adhesion and reduce ReboundingLoss – Negligible wastage
• Smooth Plaster that is cost effective andtime-saving• High Durability – Polymer added to increasedurability of plaster

Additional Information:

• Packaging Details: 40kg

Service Details:

MasterTop 410 is a non-metallic floor hardener, which contains specially graded nonmetallic hard wearing natural aggregates. It is applied as a dry shake over freshly floated concrete to provide a durable, non-slip monolithic floor.

FEATURES AND BENEFITS

• High abrasion and impact resistance – Long service life
• Better abrasion resistance than plain concrete – Extended service life
• Non rusting – Suitable for wet environments
• Non-slip – Improved safety for personnel and forklifts in wet environments.
• Dense surface – Resists oil and grease penetration
• Coloured surface – Can create aesthetically pleasing environment 
• Easy application at time of placing concrete – Floor available for full service once concrete is cured.
• Able to applied at higher ambient temperatures – Wide application range

Additional Information:

• Packaging Details: 25kg

Service Details:

Sika, the global leader in construction chemicals, is reinforcing its commitmenttowards building ever efficient infrastructure. To achieve this, goal, Sika has beencontinuously pursuing innovative technologies. Sika India strives to offer a widerange of waterproofing products and significant step towards that is theacquisition of Texsa India.Texsa India, previously a part of Texsa Group and a force to reckon with in theModified Bitumen membrane segment has state-of-the-art production facility inManda, Jaipur (India). Sika at the Manda factory produces one of the finestspecimens of Modified Bitumen membrane thereby reinforcing its leadershipposition manifold. Through the acquisition of Texsa India, Sika has laid hands on atreasure trove of more than 50 years of rich experience in the Modified Bitumentechnology.Today, Sika India is geared up to supply several varieties of the finest produce ofAPP bitumen membranes for waterproofing solutions. Each of these membranesguarantees superior and consistent quality catering to the diverse needs of themarket. If you have a waterproofing requirement, we have Modified Bitumenmembranes!

Sika s APP Technology:
Sika s APP/ Plastomeric Bituminous waterproofing membranes are manufacturedfrom a rich mixture of bitumen and selected polymers blended together to obtainexcellent heat resistance, flexibility and durability. Modified bitumen membraneshave a dimensionally stable carrier to obtain excellent tensile strength, tear andpuncture resistance.

Uses:

• It is used as waterproofing /damp proofing membrane for protection of various substrates in wide range of applications.
• Medium to large roof slabs ( domestic, commercial and industrial)
• Basements and raft slabs
• Exposed roofs (Mineral finish membranes)
• Underground car parks etc.
• Bridges & Underpass

Advantages:

• Easy to apply
• Minimum water absorption
• Easy to install by torching method
• Long term flexibility
• Excellent water tightness
• High tensile strength, tear and puncture resistance
• Capable of withstanding thermal and structural stresses
• Highly durable under long term aging

Surface Preparation :
Concrete, mortar surfaces must be clean, free from grease, oil, and loosely adhering particles.

Application Method / Tools:
Application procedure may vary slightly depending upon site conditions. However,general guidelines are as follows.Apply solvent / water based primer to a clean, smooth and dry surface by brush,roller or spray. Unroll, align and re-roll correctly before torching. Use gas burner toheat the substrate and thermo fusible film on the underside of the membrane.When the thermo- fusible film melts after torching, the membrane is ready tostick. Roll forward and press firmly against the substrate to bond. Heat the roundtipped trowel and use the same to smoothen and press the seam to overlap. Sideoverlaps should be a minimum of 80 to 100 mm and end overlaps 150 mm.All angles and abutments should be sealed with extra care to ensure full bondage.The edges should be sealed well into the grooves.The membrane should be protected from getting damaged due to ongoing siteactivities. During backfilling either by cement sand plaster or other suitablemethods.

Storage Conditions:
Rolls must be stored in their original package, in vertical position andunder cool and dry conditions. They must be protected from directsunlight, rain, snow and ice, etc.

Additional Information:

• Production Capacity: Unlimited
• Delivery Time: 2 - 3 Days

Service Details:

Sikaflex® PRO-3 is a 1-component, moisture-curing,elastic joint sealant with high mechanical and chemicalresistance.
USES
Sikaflex® PRO-3 is designed for movement and connectionjoints in floors, pedestrian and traffic areas(e.g. parking decks, car parks), warehouses and productionareas, applications in the food industry,sewage treatment plants, tunnel construction and incleanrooms.

Service Details:

Sika MonoTop®-3400 Abraroc is a 1-part, cementitious hand or machine applied structural concrete repair mortar with very high resistance to hydraulic abrasion.
For new and refurbishment of structures subject to hydraulic abrasion (sewer pipes, sewage treatment,plants, dams and maritime structures)

Service Details:

SikaSwell® S-2 is a 1-part polyurethane hydrophilicsealant which swells in contact with water to seal alltypes of construction joints and penetrations in concretestructures.It is used to adhere the SikaSwell® A and SikaSwell® Pprofiles to the structure.Joint sealing Construction joints Pipe and steel work penetrations through walls andfloor slabs Around all types of penetrations and constructionjoints Construction joints in cable ducts

Service Details:

Sikalastic®-445 is a one part, solvent containing, highly elastic, moisture curingpolyurethane for seal coats and coatings.
Waterproofing on flat roofs, balconies and terraces.For detailing on roofs and general waterproofing in new construction and forrefurbishment.(Reflective) coating on old and new metal, bitumen and concrete roofs.

Service Details:

Sika MonoTop®-160 Migrating is a 1-part, cementitious waterproofing slurry modified with selected aggregates and active chemicals. The active components migrate within the concrete pore and capillary network and reacts with the available moisture and free lime to form a non-soluble crystalline structure within the network. The slurry can be applied by brush or spray and provides a waterproof layer to prevent the penetration of water to all types of concrete structures. 

Service Details:

SikaProof® ExTape-150 is a self-adhesive tape based on a butyl adhesive for external jointing and detailing on  SikaProof® A & P membrane systems. The tape is composed of a yellow carrier film and a divided release liner. Suitable for use in hot and tropical climatic conditions.

Additional Information:

• Packaging Details: 4 rolls packed in one box.

Service Details:

PIBIAL is an asphalt-, solvent- and additive-based primer paint to improve adherence. PIBIAL is used in the preparation of concrete, metal or wood surfaces to be waterproofed with self-adhesive or heat-applied bituminous membranes in order to improve adherence of the waterproofing material to the support.

Service Details:

Sikafloor®-315 is a three and four parts, high solids, abrasion resistant, aliphatic polyurethane based textured coatings.
Sikafloor®-315 may only be used by experienced professionals. Sikafloor®-315 is used as :
  Seal coat for Sikafloor® series products.
  Wear resistant coating for high traffic areas.

Service Details:

270 pieces on an EU-pallet. Weight: approx. 2,8 kg/piece
Sika® FloorJoint XS is a carbon fibre reinforced polymer (CFRP) composite, prefabricated, floor joint panel with high mechanical resistance for normal up to medium wear loading conditions. Its sinusoidal surface tooth profile allows for an improved load distribution and results in minimum vibrations under direct car and forklift traffic. Gap widths: 0–5 mm. Sika® FloorJoint XS is a small version of Sika® FloorJoint S and is the main part of the Sika® FloorJoint PB-30 XS System.

Additional Information:

• Packaging Details: 270 pieces on an EU-pallet. Weight: approx. 2,8 kg/piece

Service Details:

Sikafloor®-21 PurCem® LP is a three part, water dispersedmedium to high strength coloured polyurethanemodified, cement and aggregate screed with selfsmoothing properties.It has an aesthetic, smooth textured aggregate surfaceproviding medium slip resistance and is typically installedat 3 to 6 mm thickness.

Service Details:

Sika® Injection-306 is a very low viscous, elastic polyacrylicinjection resin with a versatile and adjustable reactiontime.
Sika® Injection-306 may only be used by experiencedprofessionals.Sika® Injection-306 is used for the repair by injectionof damaged waterproofing membranes (single anddouble layer system).

Service Details:

Sikafloor®-315 is a three and four parts, high solids,abrasion resistant, aliphatic polyurethane based texturedcoatings.
Sikafloor®-315 may only be used by experienced professionals.Sikafloor®-315 is used as  Seal coat for Sikafloor® series products Wear resistant coating for high traffic areas.

Service Details:

Ever since being established in 2005, Rajesh Infrastructure Pvt. Ltd. has been indulged in Trading and Service Providing such as Waterproofing Service, Coating Service, Foundation Grouting Services, PVC Membrane and many more. These are highly demanded by industrial and commercial for use in various areas.

Service Details:

Ever since being established in 2005, Rajesh Infrastructure Pvt. Ltd. has been indulged in Trading and Service Providing such as Waterproofing Service, Coating Service, Foundation Grouting Services, PVC Membrane and many more. These are highly demanded by industrial and commercial for use in various areas.

Service Details:

Ready to use grey cement based non-shrink, self- curing mortar for fixing AAC blocks, Concrete blocks, fly ash bricks etc.
USES: 
Fixing and Jointing masonry units like AAC blocks, Concrete blocks, fly ash bricks etc.
CHARACTERISTICS / ADVANTAGES
▪ Ready to use, only water to be added.
▪Thinner jointing material with very high tensile adhesion strength improving the overall masonry strength. 
▪ Better bond than conventional cement based mortar
▪ Faster to apply due to good spreadable properties.
▪ Excellent high strength & water retention properties
▪Economical as quantity of mortar is less than conventional mortar 
▪ Self-curing. 

Additional Information:

• Delivery Time: 5days

Service Details:

Sikafloor®-31 PurCem® LP is a three part, solvent free,high build, coloured, matt finish, polyurethane modified,cement and aggregate coating with excellentchemical resistance and very good resistance to abrasionand mechanical damage.Typically applied in two coats for a total of 0.2 - 0.25mm.

Service Details:

Sikafloor®-269 ECF CR is a two part, total solid, electrostatic conductive, low particle and ultra-low VOC/AMC emission, self-smoothing epoxy resin for floor covering designed for cleanroom environments. "Total solid epoxy composition acc. to the test method Deutsche Bauchemie e.V. (German Association for construction chemicals)". Sikafloor®-269 ECF CR is the main wearing course of the Sikafloor® Multidur ES-28 ECF/EQ System. 

Service Details:

available in 300ml and 600ml sausage 

Service Details:

ShaliPrime S (formerly known as ShaliSeal Primer) is a two component epoxy system withadhesion promoting ingredients. The low viscosity primer facilitates proper bonding of sealants with concrete, steel surface, aluminium and glass.
Colour• Component A - Clear• Component B - Light Brown

Service Details:

Two components polyurethane adhesive.
Sarnacol®-2152 is used to adhere Sarnafil® G 476 (unexposed),Sarnafil® G 410 L Felt (exposed) on concrete.