Waterproofing Chemical

Service Details:

SuperThermoLay® is an uniquely formulated pre-fabricated plastomeric waterproofing membrane with spun bonded polyester mat at its core. SuperThermoLay® has an excellent resistance to weather and ageing. The core of 160 gsm spun bonded non-woven polyester mat offers an excellent tensile strength, elongation and a superior lap joint strength. 

Application:

roofs, reservoirs, basements, basement roof, sunken slabs, terrace garden, car parking, tunnels and bridge decks.

Property: 3 & 4 mm
Penetration @ 25 OC: 25 ± 5Softening Point, OC: ≥150Heat Resistance, 120 OC, 2 hr: No flowCold Flexibility, OC : -2Water Absorption, % : 0.2

Service Details:

Polysulphide Sealants
Keeping in mind the various requirements of the customers, we are involved in offering best quality of Polysulphide Sealant. The offered Polysulphide Sealant is manufactured under the supervision of our quality expert auditors who make sure that we deliver the world class quality products to customers. Polysulphide Sealant is extensively used...

Additional Information:

• Production Capacity: Unlimited
• Delivery Time: 2 Days
• Packaging Details: Box

Service Details:

Sika® Polysulphide PG is a cross linking polysulphide based elastic sealant for horizontal expansion joints. Suitable for use in hot and tropical climatic conditions.
It is used in horizontal joints in many types of buildings and civil engineering constructions such as:  Expansion joints in floors PQC joints, Precast concrete elements Bridge deck joints Reservoirs Vacuum dewatered floor joints/groove sealing, crack repairing Horizontal trafficable joints, airport runways, car park, roads and culverts Wherever a permanently flexible horizontal seal is required

Service Details:

SikaRep® Microcrete-4 is factory designed pourable, non shrink, repair concrete with selected cement, aggregate and other chemicals. Recommended waterand coarse aggregate to be added at site as per requirement.
USESSikaRep® Microcrete-4 is mainly recommended for therepair of damaged concrete structures e.g  Columns  Beams  Slabs, etc.It is also recommended for grouting of large gaps

Service Details:

Sikament®-112 a plasticizer for free flowing concrete in floor, slabs, foundations, slender components with dense reinforcement, walls, columns, pavements and other structural and non structural elements. Specially recommended for the following types of concrete: 

• Ready mix concrete 
• Precast concrete 
• Site batched concrete 

Service Details:

We provide best quality products in  uot industry.

Premium quality

Additional Information:

• Packaging Details: 30kg

Service Details:

AsianPaints Smartcare Bitumen Oil Base primer is a cold applied solvent based Bituminous solution designed to penetrate and seal porous surfaces prior to the application of covering materials.

Additional Information:

• Packaging Details: 20ltr

Service Details:

Sikafloor®-21 PurCem® is a multi-component, waterbasedcoloured polyurethane hybrid screed with selfsmoothingproperties. It has a smooth, matt, impervious,hard wearing surface and is typically installed at3–6 mm thickness.

Service Details:

Sarnacol 808 is a solvent based contact adhesive.
Uses
For adhering Sarnafil® G410-20L Felt to approved substrates
e.g.:

• Concrete
• Plaster screeds
• Some metal sheet types
• Plywood
• Timber boarding

Service Details:

Two Component epoxy based resin waterproofing compound.
Water Dilutable

Service Details:

SuperSilverShield® is an anti-corrosive, water proofing paint with aluminium finishSuperSilverShield® is composed of oxidized bitumen, solvents and specially formulated aluminum compound.

ApplicationSuperSilverShield® is used as a protective coating on iron, steel, masonry and other surfaces.Advantages• Deflects UV rays and thus prevents degradation of membrane due to exposure to sunlight.• Facilitates heat insulation.Application Methodology➢ Surface Preparation• Remove dust, flakes, oil, grease or other foreign particles by jet or dry air and clean the surface before applying SuperSilverShield®.• Undercoat is not necessary for its application.➢ Material Preparation• Stir SuperSilverShield® by a slow speed mixture (approx. 400 rpm) fitted with a suitable mixing paddle to ensure thorough dispersion of aluminium for a uniform finish.➢ Application of Material• Apply SuperSilverShield® on the prepared surface by brush.• Allow it to dry for 5 hr.• SuperSilverShield® can be applied over old painted surfaces without burning off or scraping, provided the old surface is not in a flaky condition.